Kia Forte Turbo Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
634 Posts
I've always used copper anti seize on mostly everything.. mid-level heat range.

Some people say not to use copper in aluminum heads due to galvanic corrosion, others have said not to worry about it. At the rate you'll be changing plugs I wouldn't worry about it.

Key is just to use a VERY SMALL amount... I've seen people coat the threads with gobs and gobs of anti seize for plugs, wheel studs, bolts etc.

Honestly, you'd be fine with any.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top