[6thElementEngineering]

Hello everyone. Our new and improved blocks will be finished at the end of this week!

Forte Vacuum Block V2.0

- These are CNC cut from a special Acetal Delrin plastic for heat resistance while still remaining very tough.
- Over 75% shorter than the original and any other block on the market, the sensor is brought back into the airflow path
- Zero side effects to this installation, simply install and hook up your stuff!

Now, for the sweet deal. If you have your 6EE vacuum block, we are going to replace it with the V2.0. We want to make sure our customers have a correctly functioning part, with no negative side effects.

All you need to do is EMAIL [email protected] the following info (no PMs will be answered):

Order number (ok if you can't find it)
First/Last name
Current shipping address

We will get these replaced as fast as we can. Good news also is your current hardware is compatible with the new part, so nothing extra to worry about.

For those of you that don't have this block yet, get on it! A 4-Port version will be available by the first week of February.

 

[bryanwolfe5]

Done & Done

 

[Forte5]

Wow 6th that just shows how you care about your customers! I have the first block and will send a email ASAP to you

 

[4tesxt]

Done......great job

 

[Scoobdude]

I need to stop spending money on the home theater and support you. Not only do your products seem well put together and thought out, but that is customer service right there.

Just a quick question, why a two and a 4 port. For the single it dual catch can? I really like how this thing looks and how it is integrated. Seriously, it looks awesome

 

[honhon]

wow... badass... and the mentioning about replacing the old ones is even better... even though i dont have one, its a great business practice

 

[4tesxt]

I have the BOV so I hook the BOV with a hose then the stock plug on the other side of the Vaccum block??

 

[Forte5]

I have the BOV so I hook the BOV with a hose then the stock plug on the other side of the Vaccum block??

If you do that your going to just hook a line to the BOV and bypass the solenoid totally and cap the other port unless you want to use it for a boost gauge

 

[4tesxt]

If you do that your going to just hook a line to the BOV and bypass the solenoid totally and cap the other port unless you want to use it for a boost gauge

Ohhh ok so I will just wait when I get the FMIC I will add that to the car lol.. or maybe the gauge comes first lmaoo

 

[bryanwolfe5]

Question. Replacing the clear vacuum line that comes with a boost gauge to black vacuum line... What size of vac line is needed?

 

[Playwithmymind]

Question. Replacing the clear vacuum line that comes with a boost gauge to black vacuum line... What size of vac line is needed?

Some use 5/32" really depends on the gauge. One of mine uses 5/32" to a remote box and the other uses 3/16" to the back of the gauge. They are so close in size the 5/32" would have no problem stretching a little to fit if needed.

 

[bryanwolfe5]

Some use 5/32" really depends on the gauge. One of mine uses 5/32" to a remote box and the other uses 3/16" to the back of the gauge. They are so close in size the 5/32" would have no problem stretching a little to fit if needed.

Thank you!! Mine is glowshift and attaches to the back. Asked / looked at a few auto supply stores but thy don't know. Buying from Amazon or eBay so I wanted to know for sure.

 

[mikex.18]

If i knew that before, i would've told you that i have the first gen so you could ship it with my fuel line

Envoyé de mon SM-G900W8 en utilisant Tapatalk

 

[Playwithmymind]

Asked / looked at a few auto supply stores but thy don't know.

Damn Canadians

 

[bryanwolfe5]

I know right!! I should also know the size, but I am a noob. Lol

 

[6thElementEngineering]

Plenty of kits in stock! Also, those of you getting replacements, those are shipping out tomorrow. Be on the look out!

 

[6thElementEngineering]

Bump! Plenty of these to go around

 

[Caezar]

Got mine !! Can't wait going to install this weekend !!

 

[Playwithmymind]

Once the rest of the KDM crowd starts seeing these 6th probably will have a hard time keeping them in stock lol

 

[6thElementEngineering]

I need to advertise on optima and sonata forums for them. I've already sold two to optima owners but they said they weren't really into the forum thing.

I'm trying though! I've at least got those cars on the website now so hopefully the SEO settings bring them to me for now!