Kia Forte Turbo Forum banner
1 - 20 of 20 Posts

·
Premium Member
Joined
·
1,035 Posts
Discussion Starter · #1 ·
These Fuel Line Kits are available for Pre-Order on our website.

Kia Forte SX Fuel Line

Check it out. I'll have these kitted for shipping by the week of 12/7.

The line kit is $169 shipped. You can use your available coupon codes for ordering too so get that Black Friday coupon code on your pre-order.
You don't have to pay until it's ready if you can't pay now, so get your order in before my Black Friday coupon expires tomorrow.

I'll have the MAX FLOW Fuel Pump/Line Kit available for Pre-Order tomorrow.

23044370689_5611026db2_h.jpg

22783998184_009f246ee7_h.jpg

23044378259_1f989e3ac9_h.jpg

23386193246_6f253853b5_h.jpg
 

·
Registered
Joined
·
1,067 Posts
Without a tune. Would this show any affect on the car?
 

·
Registered
Joined
·
981 Posts
Does the code "Cyber Monday" work? lol
 

·
Premium Member
Joined
·
1,035 Posts
Discussion Starter · #4 ·
Without a tune. Would this show any affect on the car?
Only if you have the symptoms of a bad factory line. I have been fortunate in not having any hesitations or interruptions in power delivery since I've owned this car.
Consider it a safety precaution if you are running well on the stock ECU tune.

If you are tuned or plan on getting tuned (whether buy us or another when the time comes) we highly recommend you have the fuel system ready for all the extra power you are going to make.

Does the code "Cyber Monday" work? lol
use code "blackfriday"

It expires tonight at midnight. Pre-Order if you want to pay later and that locks your price in with the discount.
 

·
Registered
Joined
·
149 Posts
Hello I have a 15 k3 koup sx ... only 3,400 miles would I need this low pressure line???
 

·
Premium Member
Joined
·
1,035 Posts
Discussion Starter · #6 ·
If you plan on doing a lot of modifications in the future, it is HIGHLY recommended you have at least the line just to be safe.

If you plan on getting a tune from us it will be a requirement. Can't live life on the edge when you get tuned!
 

·
Registered
Joined
·
149 Posts
If you plan on doing a lot of modifications in the future, it is HIGHLY recommended you have at least the line just to be safe.

If you plan on getting a tune from us it will be a requirement. Can't live life on the edge when you get tuned!
Well I plan of having a CAI 6th EE, 2x catch can, ecu tuned, resonator delete, turboxs sml BOV to bigin with ....
 

·
Registered
Joined
·
981 Posts
@6th, Might I assume that you are using all Russell Performance hardware? Nothing but the best.

Just for anyone that maybe curious to what it would cost to do this as a DIY, adapters, 180° -6 AN fitting, 90° -6 AN fitting and the Proflex hose would run you right at $136 and if you have ever messed around with braided line and AN fittings you wouldn't think twice about spending the extra few dollars to get this as a kit. Personally I have access to the tools to do the crimps for AN fitting and I will still choose to buy the kit over doing it myself.
 

·
Premium Member
Joined
·
1,035 Posts
Discussion Starter · #10 ·
@6th, Might I assume that you are using all Russell Performance hardware? Nothing but the best.

Just for anyone that maybe curious to what it would cost to do this as a DIY, adapters, 180° -6 AN fitting, 90° -6 AN fitting and the Proflex hose would run you right at $136 and if you have ever messed around with braided line and AN fittings you wouldn't think twice about spending the extra few dollars to get this as a kit. Personally I have access to the tools to do the crimps for AN fitting and I will still choose to buy the kit over doing it myself.
While Russel is nice, it's over-priced vs what I can design/make myself. :)

FYI everyone, these are now officially a stocked item. These can ship right away :)
 

·
Registered
Joined
·
468 Posts
now we needs the 6th element Turbo manifold upgrade..
 

·
Registered
Joined
·
1,067 Posts
^ that would be nice... maybe just an external wastegate option....
 

·
Registered
Joined
·
580 Posts
Well since the turbo is connected and they already sell a stuffed upgrade from BW everyone sells . Unless it's a manifold to turbo of choice no need . But what I would like to see is an upgraded intake plenum like BTR has . Yeah the elephant in the room no forum is talking about BTR has a custom plenum on the 500hp+ veloster lol
 
1 - 20 of 20 Posts
Top